Two numbers decide whether a battery suits your speaker: its voltage must sit inside your amp’s input range, and its watt-hours decide how long it plays.
Lithium-ion cells are 3.7 V nominal and swing from about 3.0 to 4.2 V. A 4S pack (four cells in series) is 14.8 V nominal and runs from about 12 to 16.8 V. A 3S pack is 11.1 V nominal, roughly 9 to 12.6 V. LiFePO4 packs are flatter: a 12.8 V pack runs about 10 to 14.6 V. Check your amp’s minimum voltage against the pack’s empty voltage, not only the nominal one. Some 2×50 W boards need 18 V or more for full power, which means a 6S pack or a tool battery.
Watt-hours = volts × amp-hours. A 14.8 V, 6.4 Ah pack holds about 95 Wh. Allow about 15% loss in the amp and converter, so usable energy is roughly 85% of that.
Amps almost never run at rated power. At moderate listening volume, plan on about 15% of the combined rated power plus about 2 W for the board itself. A 2×50 W amp averages around 17 W. A 2×15 W amp averages around 6.5 W. Runtime in hours = usable Wh ÷ average watts.
| Pack | Wh | Hours, 2×50 W amp | Hours, 2×15 W amp |
|---|---|---|---|
| 4S 18650, 3.2 Ah | 47 | 2.4 | 6.1 |
| 4S 18650, 6.4 Ah | 95 | 4.8 | 12.4 |
| 6S 18650, 6.4 Ah | 142 | 7.1 | 18.6 |
| LiFePO4 12.8 V, 6 Ah | 77 | 3.9 | 10.1 |
| LiFePO4 12.8 V, 20 Ah | 256 | 12.8 | 33.5 |
| 12 V lead-acid, 7 Ah | about 60 usable | 3.0 | 7.8 |
Loud, bass-heavy playback can double these draws and halve the runtimes.
Use a pack with a built-in BMS, charge it with a charger made for its chemistry, and put a fuse close to the battery on the positive lead. Keep packs from being crushed or pierced, and don’t charge a new build unattended the first time. Example parts: 4S pack, LiFePO4 pack, inline fuse.